Schema Comparison (46 vs 40) Score = 1.000
- Date Last Updated
- 2009-01-02 13:39:24+0000
Note: This page is automatically generated. Edits will be lost.
This document presents a summary of an automated comparison of two DiGIR federation schemas. Various attributes of the documents are compared and given a score of 0…1. The overall comparison score is (sum of attribute scores) / (maximum possible score). In general, scores over 0.9 seem to indicate that the two federation schemas are likely to be different versions of the same schema.
The following schema attributes are compared:
- Schema namespace
- Imported namespaces
- Document level annotation
- Number of concepts
- Definitions of each concept
Concepts between schemas are matched by comparing each concept in schema A with every concept in schema B. The concepts that match with the highest score are presented in the Concept Definitions section below, and that score is added to the total for the document.
- Schema A (ID = 46)
- http://bnhm.berkeley.edu/manis/DwC/darwin2jrw030315.xsd
- Schema B (ID = 40)
- http://enuvis05.fulton.asu.edu:9000/digir/darwinmanis121.xsd
Namespace Comparison (score = 1.000)
- Schema A NS
- http://digir.net/schema/conceptual/darwin/2003/1.0
- Schema B NS
- http://digir.net/schema/conceptual/darwin/2003/1.0
Schema Annotation (score = 1.000)
Schema A:
$Id: darwin2.xsd,v 1.21 2003/06/17 11:14:24 John Wieczorek Exp $ XML Schema draft Darwin Core Version 2 (http://tsadev.speciesanalyst.net/documentation/ow.asp?DarwinCoreV2) content model. Uses and extends data elements from the DiGIR (http://digir.net) protocol.
Schema B:
$Id: darwin2.xsd,v 1.21 2003/06/17 11:14:24 John Wieczorek Exp $ XML Schema draft Darwin Core Version 2 (http://tsadev.speciesanalyst.net/documentation/ow.asp?DarwinCoreV2) content model. Uses and extends data elements from the DiGIR (http://digir.net) protocol.
Imported Namespaces (score = 1.000):
Schema A:
http://digir.net/schema/protocol/2003/1.0 http://digir.net/schema/protocol/2003/1.0
Schema B:
http://digir.net/schema/protocol/2003/1.0 http://digir.net/schema/protocol/2003/1.0
Concept Defintions (score = 1.000): %s
Best matches for each concept. Note that where the number of concepts defined in each schema is different, only the smaller set is used in the comparison since these represent the best matches out of all possible combinations.
| Schema A | Schema B | Score |
| DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 date and time in UTC(GMT) when the record was last modified. Example: “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be “1994–11-05T13:15:30Z” (see http://www.w3.org/TR/NOTE-datetime). |
DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 date and time in UTC(GMT) when the record was last modified. Example: “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be “1994–11-05T13:15:30Z” (see http://www.w3.org/TR/NOTE-datetime). |
1.000 |
| BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A description indicating whether the record represents an observation, tissue sample, living organism, voucher specimen, germplasm/seed, genetic information, etc. |
BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A description indicating whether the record represents an observation, tissue sample, living organism, voucher specimen, germplasm/seed, genetic information, etc. |
1.000 |
| InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A code that identifies the institution to which the cataloged item belongs. No global registry exists for institutional codes; use the code that is “standard” in your discipline. This attribute must contain no spaces. |
InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A code that identifies the institution to which the cataloged item belongs. No global registry exists for institutional codes; use the code that is “standard” in your discipline. This attribute must contain no spaces. |
1.000 |
| CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value that identifies the collection within the institution in which the item is cataloged. This attribute must contain no spaces. |
CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value that identifies the collection within the institution in which the item is cataloged. This attribute must contain no spaces. |
1.000 |
| CatalogNumberText (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which identifies an individual cataloged item within the collection. It is recommended that this value provides a key by which the individual cataloged item can be identified. |
CatalogNumberText (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which identifies an individual cataloged item within the collection. It is recommended that this value provides a key by which the individual cataloged item can be identified. |
1.000 |
| CatalogNumberNumeric (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The CatalogNumber as a numeric value, if applicable. Allows searching on numeric ranges of CatalogNumbers. |
CatalogNumberNumeric (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The CatalogNumber as a numeric value, if applicable. Allows searching on numeric ranges of CatalogNumbers. |
1.000 |
| Collector (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the collector(s) of the original data for the cataloged item. |
Collector (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the collector(s) of the original data for the cataloged item. |
1.000 |
| CollectorNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to the cataloged item at the time of collection. Serves as a link between field notes and the cataloged items. |
CollectorNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to the cataloged item at the time of collection. Serves as a link between field notes and the cataloged items. |
1.000 |
| FieldNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to a set of material that resulted from a single collecting event. |
FieldNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to a set of material that resulted from a single collecting event. |
1.000 |
| YearCollected (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was collected. |
YearCollected (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was collected. |
1.000 |
| MonthCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month of year in the Common Era calendar during which the cataloged item was collected from the field. |
MonthCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month of year in the Common Era calendar during which the cataloged item was collected from the field. |
1.000 |
| DayCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was collected from the field. |
DayCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was collected from the field. |
1.000 |
| TimeCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The time of day the cataloged item was collected, expressed as decimal hours from midnight, local time (e.g., 12.0 = noon, 13.5 = 1:30pm). |
TimeCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The time of day the cataloged item was collected, expressed as decimal hours from midnight, local time (e.g., 12.0 = noon, 13.5 = 1:30pm). |
1.000 |
| VerbatimCollectingDate (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The verbatim original representation of the date information for the collecting event. |
VerbatimCollectingDate (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The verbatim original representation of the date information for the collecting event. |
1.000 |
| FieldNotes (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to, or flag marking the existence of notes taken in the field for the cataloged item. |
FieldNotes (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to, or flag marking the existence of notes taken in the field for the cataloged item. |
1.000 |
| JulianDay (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The ordinal day of the year (i.e., the number of days since December 31 of the previous year; January 1 is Julian Day 1) on which the cataloged item was collected. May be derived from the YearCollected, MonthCollected, and DayCollected by the provider. |
JulianDay (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The ordinal day of the year (i.e., the number of days since December 31 of the previous year; January 1 is Julian Day 1) on which the cataloged item was collected. May be derived from the YearCollected, MonthCollected, and DayCollected by the provider. |
1.000 |
| HigherGeography (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of all geographic elements less specific than locality. “Like” query operations on this element will search for a substring in any of the higher geography attributes. |
HigherGeography (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of all geographic elements less specific than locality. “Like” query operations on this element will search for a substring in any of the higher geography attributes. |
1.000 |
| ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the continent or ocean from which the cataloged item was collected. |
ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the continent or ocean from which the cataloged item was collected. |
1.000 |
| IslandGroup (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island group from which the cataloged item was collected. |
IslandGroup (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island group from which the cataloged item was collected. |
1.000 |
| Island (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island from which the cataloged item was collected. |
Island (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island from which the cataloged item was collected. |
1.000 |
| Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the country or major political unit from which the cataloged item was collected. |
Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the country or major political unit from which the cataloged item was collected. |
1.000 |
| StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the state, province, or region (i.e., the next smaller political region than Country) from which the cataloged item was collected. |
StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the state, province, or region (i.e., the next smaller political region than Country) from which the cataloged item was collected. |
1.000 |
| County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the county, shire, or municipality (i.e., the next smaller political region than StateProvince) from which the cataloged item was collected. |
County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the county, shire, or municipality (i.e., the next smaller political region than StateProvince) from which the cataloged item was collected. |
1.000 |
| Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The description of the locality from which the cataloged item was collected, sans geographic information provided in other geographic fields. |
Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The description of the locality from which the cataloged item was collected, sans geographic information provided in other geographic fields. |
1.000 |
| DecimalLatitude () Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
DecimalLatitude () Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
1.000 |
| DecimalLongitude () Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
DecimalLongitude () Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
1.000 |
| HorizontalDatum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the DecimalLatitude and DecimalLongitude refer. |
HorizontalDatum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the DecimalLatitude and DecimalLongitude refer. |
1.000 |
| OriginalCoordinateSystem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name of the system in which the original geographic coordinates were recorded (e.g., “decimal degrees”, “degrees minutes seconds”, “UTM”, etc.). |
OriginalCoordinateSystem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name of the system in which the original geographic coordinates were recorded (e.g., “decimal degrees”, “degrees minutes seconds”, “UTM”, etc.). |
1.000 |
| VerbatimLatitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Latitude data in its original format in the source database. |
VerbatimLatitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Latitude data in its original format in the source database. |
1.000 |
| VerbatimLongitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Longitude data in its original format in the source database. |
VerbatimLongitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Longitude data in its original format in the source database. |
1.000 |
| GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
1.000 |
| CoordinateUncertaintyInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The upper limit of the distance (in meters) from the given latitude and longitude describing a circle within which the whole of the described locality must lie. Use NULL where the uncertainty is unknown, cannot be estimated, or is not applicable. |
CoordinateUncertaintyInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The upper limit of the distance (in meters) from the given latitude and longitude describing a circle within which the whole of the described locality must lie. Use NULL where the uncertainty is unknown, cannot be estimated, or is not applicable. |
1.000 |
| LatLongComments (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData Comments about the LatLong determination. |
LatLongComments (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData Comments about the LatLong determination. |
1.000 |
| BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:searchableData This access point provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the DecimalLatitude and DecimalLongitude columns by the data provider. |
BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:searchableData This access point provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the DecimalLatitude and DecimalLongitude columns by the data provider. |
1.000 |
| MinimumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
MinimumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
1.000 |
| MaximumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
MaximumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
1.000 |
| VerbatimElevation (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Elevation in its original format in the source database. |
VerbatimElevation (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Elevation in its original format in the source database. |
1.000 |
| MinimumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MinimumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
1.000 |
| MaximumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MaximumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
1.000 |
| VerbatimDepth (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Depth in its original format in the source database. |
VerbatimDepth (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Depth in its original format in the source database. |
1.000 |
| ScientificName (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full name of lowest level taxon to which the cataloged item can be identified (e.g., genus name, specific epithet, subspecific epithet, etc.). |
ScientificName (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full name of lowest level taxon to which the cataloged item can be identified (e.g., genus name, specific epithet, subspecific epithet, etc.). |
1.000 |
| HigherTaxon (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of names of taxonomic ranks less specific than Genus. “Like” query operations on this element will search for a substring in any of the higher taxon attributes. |
HigherTaxon (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of names of taxonomic ranks less specific than Genus. “Like” query operations on this element will search for a substring in any of the higher taxon attributes. |
1.000 |
| Kingdom (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic kingdom to which the cataloged item belongs. |
Kingdom (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic kingdom to which the cataloged item belongs. |
1.000 |
| Phylum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic phylum (or division) to which the cataloged item belongs. |
Phylum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic phylum (or division) to which the cataloged item belongs. |
1.000 |
| Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic class to which the cataloged item belongs. |
Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic class to which the cataloged item belongs. |
1.000 |
| Order (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic order to which the cataloged item belongs. |
Order (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic order to which the cataloged item belongs. |
1.000 |
| Family (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic family to which the cataloged item belongs. |
Family (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic family to which the cataloged item belongs. |
1.000 |
| Genus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic genus to which the cataloged item belongs. |
Genus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic genus to which the cataloged item belongs. |
1.000 |
| Species (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic specific epithet of the cataloged item. |
Species (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic specific epithet of the cataloged item. |
1.000 |
| Subspecies (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic subspecific epithet of the cataloged item. |
Subspecies (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic subspecific epithet of the cataloged item. |
1.000 |
| ScientificNameAuthor (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The author of the ScientificName. Can be more than one author in a concatenated string. Should be formatted according to the conventions of the applicable taxonomic discipline. |
ScientificNameAuthor (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The author of the ScientificName. Can be more than one author in a concatenated string. Should be formatted according to the conventions of the applicable taxonomic discipline. |
1.000 |
| IdentifiedBy (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the person(s) who applied the currently accepted ScientificName to the cataloged item. |
IdentifiedBy (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the person(s) who applied the currently accepted ScientificName to the cataloged item. |
1.000 |
| IdentificationModifier (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Additional information documenting the taxonomic determination of the cataloged item (e.g., “cf.”, “aff.”, “subspecies in question”, etc.). |
IdentificationModifier (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Additional information documenting the taxonomic determination of the cataloged item (e.g., “cf.”, “aff.”, “subspecies in question”, etc.). |
1.000 |
| YearIdentified (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was identified as having the ScientificName. |
YearIdentified (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was identified as having the ScientificName. |
1.000 |
| MonthIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month in the Common Era calendar during which the cataloged item was identified. |
MonthIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month in the Common Era calendar during which the cataloged item was identified. |
1.000 |
| DayIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was identified. |
DayIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was identified. |
1.000 |
| TypeStatus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of one or more nomenclatural types that the cataloged item represents (e.g., “holotype of Ctenomys sociabilis. Pearson O. P., and M. I. Christie. 1985. Historia Natural, 5(37):388.”). |
TypeStatus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of one or more nomenclatural types that the cataloged item represents (e.g., “holotype of Ctenomys sociabilis. Pearson O. P., and M. I. Christie. 1985. Historia Natural, 5(37):388.”). |
1.000 |
| Sex (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The sex of a cataloged item (e.g., male, female, hermaphrodite, gynandromorph, not recorded, indeterminate, transitional – between sexes, for sequential hermaphrodites). |
Sex (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The sex of a cataloged item (e.g., male, female, hermaphrodite, gynandromorph, not recorded, indeterminate, transitional – between sexes, for sequential hermaphrodites). |
1.000 |
| Preparations (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of preparations and preservation methods (skin, skull, skeleton, whole animal (ETOH), slide, etc.) for the cataloged item. |
Preparations (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of preparations and preservation methods (skin, skull, skeleton, whole animal (ETOH), slide, etc.) for the cataloged item. |
1.000 |
| Tissues (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of tissues and preservation methods (whole (frozen), liver (EDTA), etc.) for the cataloged item. |
Tissues (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of tissues and preservation methods (whole (frozen), liver (EDTA), etc.) for the cataloged item. |
1.000 |
| IndividualCount (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container referred to by the catalog number. Not an estimate of abundance or density at the collecting locality. |
IndividualCount (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container referred to by the catalog number. Not an estimate of abundance or density at the collecting locality. |
1.000 |
| AgeClass (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The age class, reproductive stage, life stage of the biological individual (e.g., juvenile, adult, eft, nymph, etc.). |
AgeClass (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The age class, reproductive stage, life stage of the biological individual (e.g., juvenile, adult, eft, nymph, etc.). |
1.000 |
| GenBankNum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData GenBank Accession number. |
GenBankNum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData GenBank Accession number. |
1.000 |
| OtherCatalogNumbers (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of previous or alternative fully qualified catalog numbers of the cataloged item whether in the current collection or in any other. |
OtherCatalogNumbers (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of previous or alternative fully qualified catalog numbers of the cataloged item whether in the current collection or in any other. |
1.000 |
| RelatedCatalogedItems (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The fully qualified identifier (Institution Code + ” ” + Collection Code + ” ” + Catalog Number) of the related Cataloged Item, preceded by the nature of the relationship (e.g., (sibling of) MVZ Mamm 1234). |
RelatedCatalogedItems (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The fully qualified identifier (Institution Code + ” ” + Collection Code + ” ” + Catalog Number) of the related Cataloged Item, preceded by the nature of the relationship (e.g., (sibling of) MVZ Mamm 1234). |
1.000 |
| Remarks (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Free text comments accompanying the cataloged item record. |
Remarks (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Free text comments accompanying the cataloged item record. |
1.000 |
