Schema Comparison (46 vs 28) Score = 0.808
- Date Last Updated
- 2009-01-02 13:36:22+0000
Note: This page is automatically generated. Edits will be lost.
This document presents a summary of an automated comparison of two DiGIR federation schemas. Various attributes of the documents are compared and given a score of 0…1. The overall comparison score is (sum of attribute scores) / (maximum possible score). In general, scores over 0.9 seem to indicate that the two federation schemas are likely to be different versions of the same schema.
The following schema attributes are compared:
- Schema namespace
- Imported namespaces
- Document level annotation
- Number of concepts
- Definitions of each concept
Concepts between schemas are matched by comparing each concept in schema A with every concept in schema B. The concepts that match with the highest score are presented in the Concept Definitions section below, and that score is added to the total for the document.
- Schema A (ID = 46)
- http://bnhm.berkeley.edu/manis/DwC/darwin2jrw030315.xsd
- Schema B (ID = 28)
- http://data.paleoportal.org/schema/conceptual/1.0/paleoportal.xsd
Namespace Comparison (score = 0.626)
- Schema A NS
- http://digir.net/schema/conceptual/darwin/2003/1.0
- Schema B NS
- http://data.paleoportal.org/schema/conceptual/1.0
Schema Annotation (score = 0.102)
Schema A:
$Id: darwin2.xsd,v 1.21 2003/06/17 11:14:24 John Wieczorek Exp $ XML Schema draft Darwin Core Version 2 (http://tsadev.speciesanalyst.net/documentation/ow.asp?DarwinCoreV2) content model. Uses and extends data elements from the DiGIR (http://digir.net) protocol.
Schema B:
$Id: paleoportal.xsd,v 0.2 2004/09/20 9:52:00 seth Exp $ Based upon http://digir.sourceforge.net/fed/beta3/darwin2.xsd XML Schema describing the PaleoPortal derivative of the Darwin Core 2 content model. Definition of certain terms used in this schema: Catalogued Item: an item, typically a specimen, information about which is stored in an electronic catalog (ie. a collections database). Record: a body of related information describing a single Catalogued Item, organized using the PaleoPortal schema defined in this document. Specimen: An individual, item, or part representative of an organism. The Catalogued Item that is the subject of each PaleoPortal record is almost always a specimen. When describing elements that can only be applied to specimens, the term "specimen" is used instead of "Catalogued Item"
Imported Namespaces (score = 1.000):
Schema A:
http://digir.net/schema/protocol/2003/1.0 http://digir.net/schema/protocol/2003/1.0
Schema B:
http://digir.net/schema/protocol/2003/1.0
Concept Defintions (score = 0.827): %s
Best matches for each concept. Note that where the number of concepts defined in each schema is different, only the smaller set is used in the comparison since these represent the best matches out of all possible combinations.
| Schema A | Schema B | Score |
| DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 date and time in UTC(GMT) when the record was last modified. Example: “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be “1994–11-05T13:15:30Z” (see http://www.w3.org/TR/NOTE-datetime). |
DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 compliant stamp indicating the date and time in UTC(GMT) when the record was last modified. Example: the instant “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be represented as “1994–11-05T13:15:30Z” (see W3C Note on Date and Time Formats). When the last modified date-time is unknown, use the date-time the record was published. |
0.961 |
| BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A description indicating whether the record represents an observation, tissue sample, living organism, voucher specimen, germplasm/seed, genetic information, etc. |
BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An abbreviation indicating whether the record represents an observation (O), living organism (L), specimen (S), germplasm/seed (G), etc. For paleontology, this will generally default to specimen (S). |
0.935 |
| InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A code that identifies the institution to which the cataloged item belongs. No global registry exists for institutional codes; use the code that is “standard” in your discipline. This attribute must contain no spaces. |
InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A “standard” code identifier that identifies the institution to which the collection identified by CollectionCode belongs. No global registry exists for assigning institutional codes. Use the code that is standard in your discipline. |
0.954 |
| CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value that identifies the collection within the institution in which the item is cataloged. This attribute must contain no spaces. |
CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value which identifies the collection to which the Catalogued Item belongs. |
0.969 |
| CatalogNumberText (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which identifies an individual cataloged item within the collection. It is recommended that this value provides a key by which the individual cataloged item can be identified. |
CatalogNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which uniquely identifies the individual Catalogued Item within the collection. It is recommended that this value provides a key by which an actual specimen can be identified. If a specimen has several items such as various types of preparation, this value should identify the individual component of the specimen. |
0.871 |
| CatalogNumberNumeric (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The CatalogNumber as a numeric value, if applicable. Allows searching on numeric ranges of CatalogNumbers. |
CatalogNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which uniquely identifies the individual Catalogued Item within the collection. It is recommended that this value provides a key by which an actual specimen can be identified. If a specimen has several items such as various types of preparation, this value should identify the individual component of the specimen. |
0.716 |
| Collector (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the collector(s) of the original data for the cataloged item. |
Collector (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the collector(s) responsible for collecting the Catalogued Item. |
0.968 |
| CollectorNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to the cataloged item at the time of collection. Serves as a link between field notes and the cataloged items. |
CollectorNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying “number” (actually alphanumeric) applied to specimens (in some disciplines) at the time of collection. Establishes links between different parts/preparations of a single specimen and between field notes and the specimen. |
0.911 |
| FieldNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An identifying string applied to a set of material that resulted from a single collecting event. |
FieldNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A “number” (actually alphanumeric) created at collection time to identify all material that resulted from a collecting event. |
0.957 |
| YearCollected (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was collected. |
YearCollected (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The year (expressed as an integer) in which the Catalogued Item was collected from the field. The full year should be expressed (e.g. 1972 must be expressed as “1972” not “72”). Must always be a four digit integer [-9999..9999] |
0.912 |
| MonthCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month of year in the Common Era calendar during which the cataloged item was collected from the field. |
MonthCollected (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The month of year the Catalogued Item was collected from the field. Possible values range from 01…12 inclusive. |
0.857 |
| DayCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was collected from the field. |
DayCollected (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The day of the month the Catalogued Item was collected from the field. Possible value ranges from 01..31 inclusive, depending upon the value of MonthCollected. |
0.848 |
| TimeCollected () Nillable?: true Sub Grp: digir:searchableReturnableData The time of day the cataloged item was collected, expressed as decimal hours from midnight, local time (e.g., 12.0 = noon, 13.5 = 1:30pm). |
DayCollected (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The day of the month the Catalogued Item was collected from the field. Possible value ranges from 01..31 inclusive, depending upon the value of MonthCollected. |
0.679 |
| VerbatimCollectingDate (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The verbatim original representation of the date information for the collecting event. |
CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value which identifies the collection to which the Catalogued Item belongs. |
0.679 |
| FieldNotes (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to, or flag marking the existence of notes taken in the field for the cataloged item. |
Notes (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Free text notes attached to the Catalogued Item. |
0.752 |
| JulianDay (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The ordinal day of the year (i.e., the number of days since December 31 of the previous year; January 1 is Julian Day 1) on which the cataloged item was collected. May be derived from the YearCollected, MonthCollected, and DayCollected by the provider. |
JulianDay (xsd:integer) Nillable?: true Sub Grp: digir:returnableData The ordinal day of the year (the number of days since December 31 of the previous year) on which the Catalogued Item was collected. This value may be derived from the YearCollected, MonthCollected, and DayCollected by the provider software. Example: January 1 is Julian Day 1. Not supported for paleontology applications. |
0.886 |
| HigherGeography (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of all geographic elements less specific than locality. “Like” query operations on this element will search for a substring in any of the higher geography attributes. |
Group (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The group name of the locality from which the Catalogued Item was collected. |
0.492 |
| ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the continent or ocean from which the cataloged item was collected. |
ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The continent or ocean in which the Catalogued Item was collected. |
0.974 |
| IslandGroup (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island group from which the cataloged item was collected. |
Group (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The group name of the locality from which the Catalogued Item was collected. |
0.749 |
| Island (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island from which the cataloged item was collected. |
Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The class name associated with the specimen. |
0.560 |
| Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the country or major political unit from which the cataloged item was collected. |
Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The country or major political unit in which the Catalogued Item was collected. ISO 3166–1 values should be used, if possible. |
0.961 |
| StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the state, province, or region (i.e., the next smaller political region than Country) from which the cataloged item was collected. |
StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The state, province or region (i.e. next political region smaller than Country) in which the Catalogued Item was collected. |
0.977 |
| County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the county, shire, or municipality (i.e., the next smaller political region than StateProvince) from which the cataloged item was collected. |
County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The county (or shire, or next political region smaller than StateProvince) in which the Catalogued Item was collected. |
0.970 |
| Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The description of the locality from which the cataloged item was collected, sans geographic information provided in other geographic fields. |
Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The locality description (place name plus an optional displacement from the place name) where the Catalogued Item was collected. Where a displacement from a location is provided, it should be in un-projected units of measurement. |
0.909 |
| DecimalLatitude () Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
Latitude (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the Catalogued Item was collected. This value should be expressed in decimal degrees. |
0.703 |
| DecimalLongitude () Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
Longitude (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the Catalogued Item was collected. This value should be expressed in decimal degrees. |
0.718 |
| HorizontalDatum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the DecimalLatitude and DecimalLongitude refer. |
Datum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the latitude and longitude refer. If not known, use “not recorded”. This concept should be vocabulary-controlled. |
0.660 |
| OriginalCoordinateSystem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name of the system in which the original geographic coordinates were recorded (e.g., “decimal degrees”, “degrees minutes seconds”, “UTM”, etc.). |
CoordinatePrecision (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData An estimate of how tightly the collecting locality was specified; expressed as a distance, in meters, that corresponds to a radius around the latitude-longitude coordinates. Leave blank when precision is unknown, cannot be estimated, or is not applicable. |
0.561 |
| VerbatimLatitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Latitude data in its original format in the source database. |
Latitude (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the Catalogued Item was collected. This value should be expressed in decimal degrees. |
0.676 |
| VerbatimLongitude (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Longitude data in its original format in the source database. |
Longitude (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the Catalogued Item was collected. This value should be expressed in decimal degrees. |
0.692 |
| GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
Period (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The period of the locality from which the Catalogued Item was collected. |
0.603 |
| CoordinateUncertaintyInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The upper limit of the distance (in meters) from the given latitude and longitude describing a circle within which the whole of the described locality must lie. Use NULL where the uncertainty is unknown, cannot be estimated, or is not applicable. |
CoordinatePrecision (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData An estimate of how tightly the collecting locality was specified; expressed as a distance, in meters, that corresponds to a radius around the latitude-longitude coordinates. Leave blank when precision is unknown, cannot be estimated, or is not applicable. |
0.583 |
| LatLongComments (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData Comments about the LatLong determination. |
Longitude (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the Catalogued Item was collected. This value should be expressed in decimal degrees. |
0.570 |
| BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:searchableData This access point provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the DecimalLatitude and DecimalLongitude columns by the data provider. |
BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:returnableData Provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the Latitude and Longitude columns by the data provider. |
0.970 |
| MinimumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
MinimumElevation (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
0.880 |
| MaximumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
MaximumElevation (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
0.880 |
| VerbatimElevation (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Elevation in its original format in the source database. |
MaximumElevation (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
0.714 |
| MinimumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MinimumDepth (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g. collecting above sea level in tidal areas). |
0.848 |
| MaximumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MaximumDepth (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g. collecting above sea level in tidal areas). |
0.848 |
| VerbatimDepth (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Depth in its original format in the source database. |
MaximumDepth (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g. collecting above sea level in tidal areas). |
0.635 |
| ScientificName (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full name of lowest level taxon to which the cataloged item can be identified (e.g., genus name, specific epithet, subspecific epithet, etc.). |
ScientificName (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full name of lowest level taxon the specimen can be identified as a member of; includes genus name, specific epithet, and subspecific epithet (zool.) or infraspecific rank abbreviation, and infraspecific epithet (bot.) Use name of suprageneric taxon (e.g., family name) if the specimen cannot be identified to genus, species, or infraspecific taxon. |
0.917 |
| HigherTaxon (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of names of taxonomic ranks less specific than Genus. “Like” query operations on this element will search for a substring in any of the higher taxon attributes. |
Period (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The period of the locality from which the Catalogued Item was collected. |
0.517 |
| Kingdom (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic kingdom to which the cataloged item belongs. |
Kingdom (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The kingdom name associated with the specimen. |
0.950 |
| Phylum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic phylum (or division) to which the cataloged item belongs. |
Phylum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylum (or division) name associated with the specimen. |
0.959 |
| Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic class to which the cataloged item belongs. |
Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The class name associated with the specimen. |
0.948 |
| Order (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic order to which the cataloged item belongs. |
Order (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The order name associated with the specimen. |
0.948 |
| Family (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic family to which the cataloged item belongs. |
Family (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The family name associated with the specimen. |
0.949 |
| Genus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic genus to which the cataloged item belongs. |
Genus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The genus name associated with the specimen. |
0.948 |
| Species (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic specific epithet of the cataloged item. |
Species (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The specific epithet associated with the specimen. |
0.957 |
| Subspecies (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The phylogenetic subspecific epithet of the cataloged item. |
Subspecies (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The sub-specific epithet associated with the specimen. |
0.959 |
| ScientificNameAuthor (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The author of the ScientificName. Can be more than one author in a concatenated string. Should be formatted according to the conventions of the applicable taxonomic discipline. |
ScientificNameAuthor (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The author of a scientific name. Author string as applied to the accepted name. Can be more than one author (concatenated string). Should be formatted according to the conventions of the applicable taxonomic discipline. |
0.924 |
| IdentifiedBy (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the person(s) who applied the currently accepted ScientificName to the cataloged item. |
IdentifiedBy (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name(s) of the person(s) who applied the currently accepted Scientific Name to the specimen. |
0.990 |
| IdentificationModifier (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Additional information documenting the taxonomic determination of the cataloged item (e.g., “cf.”, “aff.”, “subspecies in question”, etc.). |
IdentificationQualifier (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A standard term to qualify the identification of the specimen when doubts have arisen as to its identification. Examples: “cf.”, “aff.”, “subspecies in question” |
0.855 |
| YearIdentified (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The four digit year in the Common Era calendar in which the cataloged item was identified as having the ScientificName. |
YearIdentified (xsd:gYear) Nillable?: true Sub Grp: digir:searchableReturnableData The year portion of the date when the Catalogued Item was identified; as four digits [-9999..9999], e.g., 1906, 2002. |
0.946 |
| MonthIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit month in the Common Era calendar during which the cataloged item was identified. |
MonthIdentified (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The month portion of the date when the Catalogued Item was identified; as two digits [01..12]. |
0.849 |
| DayIdentified () Nillable?: true Sub Grp: digir:searchableReturnableData The two digit day of the month in the Common Era calendar during which the cataloged item was identified. |
DayIdentified (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The day portion of the date when the Catalogued Item was identified; as two digits [01..31]. Possible value ranges from 01..31 inclusive, depending upon the value of MonthIdentified. |
0.836 |
| TypeStatus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of one or more nomenclatural types that the cataloged item represents (e.g., “holotype of Ctenomys sociabilis. Pearson O. P., and M. I. Christie. 1985. Historia Natural, 5(37):388.”). |
TypeStatus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Indicates the kind of nomenclatural type that a specimen represents. (This is incomplete because type status actually describes the relationship between a name and a specimen [or ternary relationship between a specimen, name, and publication].) In particular, the type status may not apply to the name listed in the scientific name, i.e., current identification. In rare cases, a single specimen may be the type of more than one name. |
0.904 |
| Sex (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The sex of a cataloged item (e.g., male, female, hermaphrodite, gynandromorph, not recorded, indeterminate, transitional – between sexes, for sequential hermaphrodites). |
Sex (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The sex of a specimen. The domain should be a controlled set of terms (codes) based on community consensus. Proposed values from Darwin Core: M=Male; F=Female; H=Hermaphrodite; I=Indeterminate (examined but could not be determined; U=Unkown (not examined); T=Transitional (between sexes; useful for sequential hermaphrodites). |
0.922 |
| Preparations (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of preparations and preservation methods (skin, skull, skeleton, whole animal (ETOH), slide, etc.) for the cataloged item. |
PreparationType (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The type of preparation (skin. slide, etc). |
0.828 |
| Tissues (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A concatenated list of tissues and preservation methods (whole (frozen), liver (EDTA), etc.) for the cataloged item. |
Facies (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The facies of the locality from which the Catalogued Item was collected. |
0.616 |
| IndividualCount (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container referred to by the catalog number. Not an estimate of abundance or density at the collecting locality. |
IndividualCount (xsd:integer) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container. Not an estimate of abundance or density at the collecting locality. |
0.955 |
| AgeClass (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The age class, reproductive stage, life stage of the biological individual (e.g., juvenile, adult, eft, nymph, etc.). |
Class (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The class name associated with the specimen. |
0.796 |
| GenBankNum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData GenBank Accession number. |
Genus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The genus name associated with the specimen. |
0.648 |
| OtherCatalogNumbers (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A list of previous or alternative fully qualified catalog numbers of the cataloged item whether in the current collection or in any other. |
CatalogNumber (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData An alphanumeric value which uniquely identifies the individual Catalogued Item within the collection. It is recommended that this value provides a key by which an actual specimen can be identified. If a specimen has several items such as various types of preparation, this value should identify the individual component of the specimen. |
0.794 |
| RelatedCatalogedItems (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The fully qualified identifier (Institution Code + ” ” + Collection Code + ” ” + Catalog Number) of the related Cataloged Item, preceded by the nature of the relationship (e.g., (sibling of) MVZ Mamm 1234). |
RelatedCatalogItem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The fully qualified identifier of a related Catalogued Item (ususally a reference to another specimen). A fully qualified Catalog Number consists of an Institution Code, a Collection Code, and a Catalog Number delimited by a space. |
0.871 |
| Remarks (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData Free text comments accompanying the cataloged item record. |
Member (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The member name of the locality from which the Catalogued Item was collected. |
0.622 |
