Schema Comparison (46 vs 10) Score = 0.946
- Date Last Updated
- 2008-11-21 13:33:45+0000
Note: This page is automatically generated. Edits will be lost.
This document presents a summary of an automated comparison of two DiGIR federation schemas. Various attributes of the documents are compared and given a score of 0…1. The overall comparison score is (sum of attribute scores) / (maximum possible score). In general, scores over 0.9 seem to indicate that the two federation schemas are likely to be different versions of the same schema.
The following schema attributes are compared:
- Schema namespace
- Imported namespaces
- Document level annotation
- Number of concepts
- Definitions of each concept
Concepts between schemas are matched by comparing each concept in schema A with every concept in schema B. The concepts that match with the highest score are presented in the Concept Definitions section below, and that score is added to the total for the document.
- Schema A (ID = 46)
- http://bnhm.berkeley.edu/manis/DwC/darwin2jrw030315.xsd
- Schema B (ID = 10)
- http://bnhm.berkeley.edu/manis/DwC/darwin2gazetteer.xsd
Namespace Comparison (score = 0.909)
- Schema A NS
- http://digir.net/schema/conceptual/darwin/2003/1.0
- Schema B NS
- http://digir.net/schema/conceptual/darwin/gazetteer/2003/1.0
Schema Annotation (score = 0.842)
Schema A:
$Id: darwin2.xsd,v 1.21 2003/06/17 11:14:24 John Wieczorek Exp $ XML Schema draft Darwin Core Version 2 (http://tsadev.speciesanalyst.net/documentation/ow.asp?DarwinCoreV2) content model. Uses and extends data elements from the DiGIR (http://digir.net) protocol.
Schema B:
$Id: darwin2.xsd,v 1.13 2003/03/15 11:14:24 John Wieczorek Exp $ $Id: darwin2gazetteer.xsd,v 1.0 2003/06/15 11:14:24 John Wieczorek Exp $ XML Schema draft Darwin Core Version 2 gazetteer (http://tsadev.speciesanalyst.net/documentation/ow.asp?DarwinCoreV2) content model. Uses and extends data elements from the DiGIR (http://digir.net) protocol.
Imported Namespaces (score = 1.000):
Schema A:
http://digir.net/schema/protocol/2003/1.0 http://digir.net/schema/protocol/2003/1.0
Schema B:
http://digir.net/schema/protocol/2003/1.0 http://digir.net/schema/protocol/2003/1.0
Concept Defintions (score = 0.951): %s
Best matches for each concept. Note that where the number of concepts defined in each schema is different, only the smaller set is used in the comparison since these represent the best matches out of all possible combinations.
| Schema A | Schema B | Score |
| DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 date and time in UTC(GMT) when the record was last modified. Example: “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be “1994–11-05T13:15:30Z” (see http://www.w3.org/TR/NOTE-datetime). |
DateLastModified (xsd:dateTime) Nillable?: true Sub Grp: digir:searchableReturnableData ISO 8601 date and time in UTC(GMT) when the record was last modified. Example: “November 5, 1994, 8:15:30 am, US Eastern Standard Time” would be “1994–11-05T13:15:30Z” (see http://www.w3.org/TR/NOTE-datetime). |
1.000 |
| BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A description indicating whether the record represents an observation, tissue sample, living organism, voucher specimen, germplasm/seed, genetic information, etc. |
BasisOfRecord (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A description indicating whether the record represents an observation, tissue sample, living organism, voucher specimen, germplasm/seed, genetic information, etc. |
1.000 |
| InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A code that identifies the institution to which the cataloged item belongs. No global registry exists for institutional codes; use the code that is “standard” in your discipline. This attribute must contain no spaces. |
InstitutionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A code that identifies the institution to which the cataloged item belongs. No global registry exists for institutional codes; use the code that is “standard” in your discipline. This attribute must contain no spaces. |
1.000 |
| CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value that identifies the collection within the institution in which the item is cataloged. This attribute must contain no spaces. |
CollectionCode (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A unique alphanumeric value that identifies the collection within the institution in which the item is cataloged. This attribute must contain no spaces. |
1.000 |
| HigherGeography (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of all geographic elements less specific than locality. “Like” query operations on this element will search for a substring in any of the higher geography attributes. |
HigherGeography (xsd:string) Nillable?: true Sub Grp: digir:searchableData The combination of all geographic elements less specific than locality. “Like” query operations on this element will search for a substring in any of the higher geography attributes. |
1.000 |
| ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the continent or ocean from which the cataloged item was collected. |
ContinentOcean (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the continent or ocean from which the cataloged item was collected. |
1.000 |
| IslandGroup (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island group from which the cataloged item was collected. |
IslandGroup (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island group from which the cataloged item was collected. |
1.000 |
| Island (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island from which the cataloged item was collected. |
Island (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the island from which the cataloged item was collected. |
1.000 |
| Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the country or major political unit from which the cataloged item was collected. |
Country (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the country or major political unit from which the cataloged item was collected. |
1.000 |
| StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the state, province, or region (i.e., the next smaller political region than Country) from which the cataloged item was collected. |
StateProvince (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the state, province, or region (i.e., the next smaller political region than Country) from which the cataloged item was collected. |
1.000 |
| County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the county, shire, or municipality (i.e., the next smaller political region than StateProvince) from which the cataloged item was collected. |
County (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The full, unabbreviated name of the county, shire, or municipality (i.e., the next smaller political region than StateProvince) from which the cataloged item was collected. |
1.000 |
| Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The description of the locality from which the cataloged item was collected, sans geographic information provided in other geographic fields. |
Locality (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The description of the locality from which the cataloged item was collected, sans geographic information provided in other geographic fields. |
1.000 |
| DecimalLatitude () Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
DecimalLatitude () Nillable?: true Sub Grp: digir:searchableReturnableData The latitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
1.000 |
| DecimalLongitude () Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
DecimalLongitude () Nillable?: true Sub Grp: digir:searchableReturnableData The longitude of the location from which the cataloged item was collected, expressed in decimal degrees. |
1.000 |
| HorizontalDatum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the DecimalLatitude and DecimalLongitude refer. |
HorizontalDatum (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The horizontal geodetic datum to which the DecimalLatitude and DecimalLongitude refer. |
1.000 |
| OriginalCoordinateSystem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name of the system in which the original geographic coordinates were recorded (e.g., “decimal degrees”, “degrees minutes seconds”, “UTM”, etc.). |
OriginalCoordinateSystem (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The name of the system in which the original geographic coordinates were recorded (e.g., “decimal degrees”, “degrees minutes seconds”, “UTM”, etc.). |
1.000 |
| VerbatimCollectingDate (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The verbatim original representation of the date information for the collecting event. |
VerbatimCoordinates (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the original geographic coordinate data (Latitude/Longitude, UTM, TRS, etc.) in its original format in the source database. |
0.781 |
| GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
1.000 |
| GeorefMethod (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A reference to the methods used for determining the coordinates and uncertainties. |
GeorefVerificationStatus (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData The extent to which the georeference has been verified to represent the location where a Cataloged Item was collected. |
0.635 |
| CoordinateUncertaintyInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The upper limit of the distance (in meters) from the given latitude and longitude describing a circle within which the whole of the described locality must lie. Use NULL where the uncertainty is unknown, cannot be estimated, or is not applicable. |
CoordinateUncertaintyInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The upper limit of the distance (in meters) from the given latitude and longitude describing a circle within which the whole of the described locality must lie. Use NULL where the uncertainty is unknown, cannot be estimated, or is not applicable. |
1.000 |
| LatLongComments (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData Comments about the LatLong determination. |
LatLongComments (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData Comments about the LatLong determination. |
1.000 |
| BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:searchableData This access point provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the DecimalLatitude and DecimalLongitude columns by the data provider. |
BoundingBox (xsd:string) Nillable?: true Sub Grp: digir:searchableData This access point provides a mechanism for performing searches using a bounding box. A Bounding Box element is not typically present in the database, but rather is derived from the DecimalLatitude and DecimalLongitude columns by the data provider. |
1.000 |
| MinimumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
MinimumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters above (positive) or below sea level of the collecting locality. |
1.000 |
| MaximumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
MaximumElevationInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters above (positive) or below sea level of the collecting locality. |
1.000 |
| VerbatimElevation (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Elevation in its original format in the source database. |
VerbatimElevation (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Elevation in its original format in the source database. |
1.000 |
| MinimumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MinimumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The minimum distance in meters below the surface of the water at which the collection was made; all material collected was at least this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
1.000 |
| MaximumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
MaximumDepthInMeters (xsd:decimal) Nillable?: true Sub Grp: digir:searchableReturnableData The maximum distance in meters below the surface of the water at which the collection was made; all material collected was at most this deep. Positive below the surface, negative above (e.g., collecting above sea level in tidal areas). |
1.000 |
| VerbatimDepth (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Depth in its original format in the source database. |
VerbatimDepth (xsd:string) Nillable?: true Sub Grp: digir:searchableReturnableData A text representation of the Depth in its original format in the source database. |
1.000 |
| IndividualCount (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container referred to by the catalog number. Not an estimate of abundance or density at the collecting locality. |
SpecimenCount (xsd:nonNegativeInteger) Nillable?: true Sub Grp: digir:searchableReturnableData The number of individuals present in the lot or container referred to by the catalog number. Not an estimate of abundance or density at the collecting locality. |
0.671 |
